Parts Replacement Procedure; Fixing Unit; Removing The Fixing Unit - Canon iR2030 Series Service Manual

Chapter 8

8.4 Parts Replacement Procedure

8.4.1 Fixing Unit

8.4.1.1 Removing the Fixing Unit

1) Draw out the drum unit.
2) Detach the rear cover.
3) detach the left cover (rear).
4) Disconnect the connector [1] of the junction harness and remove the reus-
able band [2], then remove the earth wire [3].
- Screw [4], 1 pc.
[2]
5) Remove the screw [1] securing the door support band. Remove the con-
nector [2] and reusable band [3], and release the duplex unit harness from
the wire saddle [4].
[2]
8-6
[3] [4]
[1]
F-8-6
[1]
[3] [4]
F-8-7
6) Open the left door until it sops and pull out the hinge shaft [1].
0017-8159
[1]
7) Lift the left door with both hands to release it from the door rotation shaft
[1], and then remove the left door.
[1]
8) Detach the inner cover [1] at the upper front.
- Screw [2], 2 pcs.
F-8-8
F-8-9
[2]
[1]
[2]
F-8-10