Attaching The Ferrite Core; Checking The Image Quality; Setting The Country/Region - Canon iR2030 Series Service Manual

7) Affix the cassette size label [1] to the paper size indication plate [2].
A4
[1]
8) Affix the caution sheet printed in an appropriate language.
[1]
9) Align the left, right, and leading edges of sheets and load the stack of paper
[1] in the cassette. Make sure that the paper is below the claws [2] of the
cassette.
MEMO:
Inserting the cassette into the machine with the inner plate locked into the
cassette will unlock the inner plate automatically. If the inner plate is not
locked, press the "PUSH DOWN" mark on the inner plate to lock it into the
cassette and then load paper.
[2]
10) Holding the knob at the center of the cassette, insert the cassette in the
machine it stops.

2.2.7 Attaching the Ferrite Core

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
The installation of the ferrite core does only for the model equipped with the
printer function.
[2]
F-2-36
F-2-37
[1]
F-2-38
1) Attach the ferrite core [2] to the user's USB cable, and then connect the
USB cable to the USB port of the host machine.
To reduce noise, attach the ferrite core as close to the USB port of the host
machine as possible.

2.2.8 Checking the Image Quality

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Plug the power cord into the outlet, and then turn on the main power
switch [2].
Supply of toner will start after the initial rotation. After a few minutes,
supply of toner finishes and the machine stops automatically.
Use the specified power supply (rated voltage -/+10% and rated current).
2) Place a document on the document glass, take a copy of it by supplying
paper from the cassette or manual feed tray, and check the printed image.
Also perform the following checks:
- Check whether abnormal sound is heard.
- Check the printed images at all preset magnifications.
- Check whether the document is copied normally on the specified
number of sheets.

2.2.9 Setting the Country/Region

iR2018 / iR2022
1) Press the following keys to display the service mode screen:
Additional Functions Key > 2 Key > 8 Key > Additional Functions Key
2) Select "# CLEAR" using the + or - key, and then press the OK key.
3) Select "TYPE" using the + or - key, and then press the OK key.
4) Using the + or - key, select the country/region type that conforms to the
communication standard used in the country/region where the machine is
used.
5) Press the OK key. When "Please Wait" disappears, the selected country/
region type takes effect.

2.2.10 Setting the Country/Region

iR2022i / iR2025 / iR2030 / iR2018i
0017-5530
1) Press the following keys to display the service mode screen:
> 2 Key > 8 Key >
2) Select "# CLEAR" using
3) Select "TYPE" using
[1]
[2]
F-2-39
[1]
[2]
F-2-40
or , and then press the OK.
or , and then press the OK.
Chapter 2
0017-5531
0017-5532
0017-5533
2-11