Timer Settings (Ir2030I/Ir2030/Ir2025I/Ir2025/Ir2022I/Ir2018I); Adjustment/Cleaning (Ir2030I/Ir2030/Ir2025I/Ir2025/Ir2022I/Ir2018I); Report Settings (Ir2030I/Ir2030/Ir2025I/Ir2025/Ir2022I/Ir2018I) - Canon iR2030 Series Service Manual

Chapter 1
Item
Tray Designation*2
Stack Bypass Standard Settings
Paper Feed Method Switch
Language Switch
Reversed Display (B/W)
Error Display for Dirty Feeder
Data Compress. Ratio for Remote Scans
Gamma Value for Remote Scans
Initialize Common Settings
*1 Indicates the default setting.
*2 Indicates items that appear only when the appropriate optional equipment is attached.

1.2.3.2 Timer Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)

Item
Date & Time Settings
Auto Sleep Time
Auto Clear Time
*1 Indicates the default setting.

1.2.3.3 Adjustment/Cleaning (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)

Item
Transfer Roller Cleaning
Drum Cleaning
Fixing Unit Cleaning
Feeder Cleaning
Special Mode M
Special Mode N
Special Mode O
Special Mode P
Bond Special Fixing Mode
Special Mode S
Rotate Collate Adjustment
Auto Adjustment for Dirty Feeder
*1 Indicates the default setting.

1.2.3.4 Report Settings (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2018i)

Item
Settings
1-10
Settings
If the Optional Inner 2 Way Tray-E2 Is Attached:
Tray A: Copy*1, Printer*1, Receive*1, Other*1
Tray B: Copy*1, Printer*1, Receive*1, Other*1
If the Optional Finisher-U2 and Additional Finisher Tray-C1 Are
Attached:
Tray A: Copy*1, Printer*1, Receive*1, Other*1
Tray B: Copy*1, Printer*1, Receive*1, Other*1
On: Paper Size, Paper Type
Off*1
Stack Bypass, Paper Drawer 1, Paper Drawer 2*2, Paper Drawer 3*2,
Paper Drawer 4*2: Speed*1, Print Side
On, Off*1
On, Off*1
On*1, Off
High Ratio, Normal*1, Low Ratio
Gamma 1.0, Gamma 1.4, Gamma 1.8*1, Gamma 2.2
Initialize: Yes, No
T-1-2
Settings
Date and Time Setting (12 digit number)
Time Zone Settings:
GMT -12:00 to GMT +12:00;
GMT -5:00*1
Daylight Saving Time Settings: On, Off*1
Use Auto Sleep Time: On*1, Off
3 to 30 minutes; 5*1
0 (Off) to 9 minutes, in one minute increments; 2 min.*1
T-1-3
Settings
Press [Start].
Press [Start].
Cleaning Sheet Print, press [Start].
Press [Start].
Standard*1, Low, Moderate, High
Manual (Medium, High), Off
Stack Bypass: Medium, High, Off*1
Drawer: Medium, High, Off*1
Off*1, Medium, High
On, Off*1
Speed Priority 1, Speed Priority 2, Off*1
Speed Priority 1*1, Speed Priority 2, Image Priority
On*1, Off
T-1-4
Settings
TX Report: On, For Error Only*1, Off
Report With TX Image: On*1, Off
Activity Report
Auto Print: On*1, Off
Send/Receive Separate: On, Off*1
RX Report: On, For Error Only, Off*1
0017-5939
0017-5940
0017-5941