Call Park: Placing A Call On Hold To Page; Two-Way Record: Recording Calls - iPECS LIP-7008D User Manual

LIP-7008D
5.5

Call Park: Placing a call on hold to Page

A user may transfer an active CO/IP call to a special holding location
(Park Orbit), which can be accessed easily from any station in the
system. Typically, this feature is used with
User of Call Park.
Parked calls are subject to
OPERATION
To park an active external call:
• Press
TRANS
• Dial the Park Orbit code (601-610 for iPECS-100 or 601-619 for
iPECS-300 & 600),
• Return to idle.
To retrieve a parked call:
• Lift the handset,
• Dial the Park Orbit code (601-610 for iPECS-100 or 601 to 619 for
iPECS-300 & 600).
5.6

Two-Way Record: Recording calls

You may record an active external conversation in your
A button is required to access this feature.
RECORD
OPERATION
To activate Two-Way Record while on a CO/IP call:
• Press
RECORD
To stop Two-Way Record while on a CO/IP call:
• Press
RECORD
Hold Recall
/ ,
PGM
, record warning tone heard and recording starts.
or hang-up and return to idle.
Paging
after the Call Park timer.
24
User Guide
to notify the desired
Voice Mail Box.