p36 Ver. 3.003 (24/4/03)
AUTO-ARM AND AUTO-DISARM
Program a TimeZone.
1) Choose a TimeZone to Program.
2) Program a "Start Time". This is the time that the Area will automatically Arm.
Program the Start Hour.
Program the Start Minute.
3) Program an "End Time". This is the time that the Area will automatically Disarm (If Auto-Disarm enabled)
Program the End Hour.
Program the End Minute.
4) Assign the Days-of-the-Week when the TimeZone will operate.
1 - Sun.
2 - Mon.
Program any Holidays required to Qualify the TimeZone
Any Days when Auto-Arming/Disarming is not to occur, when the TimeZone would normally be Valid, must be programmed as Holidays.
Program the Holiday Month (0 - 12) and the Holiday Date (0 - 31) for up to 10 Holidays.
Auto-Arming Options. Away Mode.
Choose the Area/s to be controlled and select one TimeZone that will control the Area.
0 - No TimeZone Control. 1 - TZ1.
If any Areas are to Auto-Arm in Home Mode, program the "Auto-Arm in Home Mode" Options.
Select the Area or Areas for Auto-Arming in Home Mode.
1 - Area 1.
2 - Area 2.
If Auto-Disarming is also required, program the Area Auto-Disarm Options.
Select the Area or Areas for Auto-Disarming.
1 - Area 1.
2 - Area 2.
Program the Auto-Arm Pre-Warn Time. (Factory Default = 255 seconds)
Program the warning time required before Auto-Arm occurs. (Via the Terminal Beeper)
Program an Auxiliary Output if required to activate an additional Warning sounder.
1) Choose the Auxiliary to control and select the "Auxiliary Event Type".
101 - Pre-Warn Area 1.
2) Check that the "Auxiliary Action" for the selected Auxiliary is set to Type 0 - "Follow Event Status".
3 - Tues.
4 - Wed
5 - Thurs
2 - TZ2.
3 - TZ3.
3 - Area 3.
4 - Area 4.
3 - Area 3.
4 - Area 4.
102 - Pre-Warn Area 2.
103 - Pre-Warn Area 3.
6 - Fri.
7 - Sat.
8 - Hol.
4 - TZ4.
104 - Pre-Warn Area 4.
CONCEPT IQ. PLUS Programmer's Manual.
NEXT 750 (TZ1), 755 (TZ2), 760 (TZ3), 765 (TZ4)
NEXT 751 (TZ1), 756 (TZ2), 761 (TZ3), 766 (TZ4)
NEXT 752 (TZ1), 757 (TZ2), 762 (TZ3), 767 (TZ4)
NEXT 753 (TZ1), 758 (TZ2), 763 (TZ3), 768 (TZ4)
NEXT 754 (TZ1), 759 (TZ2), 764 (TZ3), 769 (TZ4)
NEXT 570 & 571 (Hol 1) to 588 & 589 (Hol 10)
NEXT 551 (Area 1), 552 (Area 2),
NEXT 553 (Area 3), 554 (Area 4)
NEXT 560
NEXT 559
NEXT 907
NEXT 801 (Aux 1), to 810 (Aux 10)
NEXT 861 (Aux 1), to 870 (Aux 10)
Need help?
Do you have a question about the CONCEPT IQ. PLUS and is the answer not in the manual?