Inner Range CONCEPT IQ. PLUS Programmer's Manual page 25

CONCEPT IQ. PLUS Programmer's Manual.
17. ENABLE/DISABLE REMOTE CONNECT FOR UPLOAD/DOWNLOAD.
Select the Remote Connect Option.
0 Remote Connect not allowed.
1 Remote Connect Enabled. (Default)
2 Remote Connect Enabled with Callback.
Program the number of Rings to Answer - If Option 1 or 2 selected above.
Program the number of Rings. A value in the range of 3 to 16 Rings may be programmed.
Enable an Answering Machine (Fax) Bypass option if required.
0 Disabled.
1 Follow-on time = 10 Seconds.
Callback Telephone Number - If Remote Connect Option 2 is selected.
Program the Telephone number of the Remote Computer. Up to 16 digits allowed. See Step 18 on page 25 for programming information.
No Reporting.
Go to Step 30
"User Programming"
How to Enter Data. Select Address: Key in the Installer PIN Code; Press
Enter Data: Enter the new Data
2 Follow-on time = 30 Seconds.
3 Follow-on time = 60 Seconds.
Is the system required to Report to a
NO
Central Monitoring Station or a Telephone?
t
then enter the 3 digit Address
.. (1-16 digits) OR Option/s to Select/De-select
DEFAULT: 1 - Remote Connect Enabled
DEFAULT: 16
DEFAULT: 0 - Disabled
t
(A1 to A3 Lamps will flash to prompt for each digit). The current Data will be displayed.
, then . NOTE: clears the current field of all data or settings ready for new data.
Ver. 3.003 p25
NEXT 512
NEXT 513
NEXT 514
NEXT 504
YES. Reporting is required.
Move on to Step 18
"Telephone Numbers".
t