Inner Range CONCEPT IQ. PLUS Programmer's Manual page 33

CONCEPT IQ. PLUS Programmer's Manual.
t
34. CHANGE THE INSTALLER PIN CODE.
This should be done before the system commissioning is completed and system operation is handed over to the client.
Ensure that a new PIN code is chosen that will not be forgotten, while still providing security against unauthorised access.
Follow the Steps of "Program a User" above. Note that Area Selection and User Type cannot be changed for the Installer Code.
To enhance the system with any of the many additional features available, the next Section of the manual "Programming of Advanced
If you have basic system requirements you may have finished your programming.
Features" provides step-by-step instructions for programming each individual feature.
Refer to the table of contents on the following page for a list of the features available.
t
Congratulations!
Ver. 3.003 p33
NEXT 401