Inner Range CONCEPT IQ. PLUS Programmer's Manual page 31

CONCEPT IQ. PLUS Programmer's Manual.
30. PROGRAM THE USERS (Wireless Remote Key + Card) cont.
3) User PIN number (if required, must be entered if a Remote or Card is not used)
Enter the new PIN number
4) Press the Area number/s
5) Select the new User Type number
0 Arm Only.
2 Arm / Disarm.
5 T oggle User Auxiliary B
8 Access Only
Delete a User.
1) Key in your PIN, then Select the User Number. Press
2) Press then .
NO
Go to
Step 34
Change
Installer
PIN.
t
... (4 or 6 digits), then press
for each Area to be Assigned to this User (0=All Areas De-selected), then press
, then press . See table below. .
1 Patrol. Arm / Disarm only after an alarm.
3 Defer Arm Only.
6 Arm / Disarm / Isolate.
9 Access Without Disarm
,
t
Are the Access Control Options
REX, Door Forced, DOTL used?
.
4 T oggle User Auxiliary A
7 Master.
, , .
.
YES
Move on to
Step 31
REX Button on Terminal.
t
Ver. 3.003 p31