Install The Optional Anamorphic Lens - Christie CP4220 Setup Manual

NOTE: Make sure the cover is between the mounting tabs.
8. Connect the harness wires.
9. Position the lens clamp DOWN to lock the lens assembly in place.
10. Calibrate the lens. See
11. Install the shroud.

2.11 Install the Optional Anamorphic Lens

1. Make sure to optimize your primary lens first for best optical alignment, offset and boresight.
2. Install the auxiliary lens mount using the instructions included with the kit.
3. Loosen the holding clamp on the auxiliary lens mount. Adjust the rotation of the anamorphic lens so the
image remains perfectly square with anamorphic in and out.
CP4220 Setup Guide
020-100692-02 Rev. 2 (05-2014)
4.3 Basic Image Alignment for details.
Installation and Setup
2-11