Reference Information; Specifications - Extron electronics VN-Matrix 300 User Manual

Reference
Information
This sections covers specifications and

Specifications

Video
Signal type ..................................... SDI, HD-SDI, 3G-SDI digital video
Resolution ...................................... 8 or 10 bits, automatic
Data rates ...................................... 270 Mbps, 1.485 Gbps, 2.970 Gbps.
Operation standards ....................... SMPTE 259M, SMPTE 296M, SMPTE 424M
Auto data rate lock ........................ Yes
Video input and loop through — encoder
Number/signal type ........................ 1 digital component video with loop through
Connectors .................................... 2 female BNC: 1 for input, 1 for loop through
Nominal level ................................. 0.8 Vp-p
Impedance ..................................... 75 ohms
Data rates ...................................... 19 Mbps to 2.97 Gbps
Vertical frequency ........................... 23.97 Hz to 60 Hz, depending on signal format
Resolution range ............................ 525i, 625i, 720p, 1080i, 1080p, 1080psf
Video processing — decoder
Compression .................................. PURE3
Frame rate delay ............................. 35 ms (70 ms encoding/decoding end-to-end)
Bit rate ........................................... 6 Mbps to 250 Mbps
Bit and frame rate control .............. Selectable
Frame rate ...................................... Up to 60 fps @ 1080p
Video output — decoder
Number/signal type ........................ 1 digital component video
NOTE: Output signal format follows the input format at the encoder.
Connectors .................................... 1 female BNC
Nominal level ................................. 0.8 Vp-p
Impedance ..................................... 75 ohms
Vertical frequency ........................... 23.97 Hz to 60 Hz, depending on signal format
Resolutions ..................................... 525i, 625i, 720p, 1080i, 1080p, 1080psf
Sync — genlock — decoder
External sync (genlock) ................... 0.8 Vp-p (digital component video)
Genlock connector ......................... 1 female BNC
hardware
10 bit, 4:2:2, with auto-detection
Codec
™
10 bit, 4:2:2, with auto-detection
information.
VN-Matrix 300 • Technical Data 66