Extron electronics VN-Matrix 300 User Manual page 57

Client Mode
From the Devicepage, Peripherals tab of each device in the client group, configure the client
devices.
1. On the page, click on the device you want to configure as a client.
Device
2.
Select the
Peripherals
a
3. Set the to
mode client.
This reveals the destination listbox.
b
4.
In the
destination
5. Change the other settings
required.
6.
Click Save All tab.
Figure 38.
Serial Pass-through Group — Client Mode
tab.
listbox, select
passthrough
c
(baud rate, data bits, stop bits, parity, and handshake) as
VN-Matrix 300 • System Configuration
for the appropriate server.
51