Alarm Type Description - Encoder - Extron electronics VN-Matrix 300 User Manual

Alarm Type Description
Alarm Type
No source
Bad source syncs
No SDI source lock
Unsupported SDI Mode Source is present, mode not
Unsupported Mode
Bad Source
Analogue Phasing error Not applicable to VN-Matrix 300
Hardware encoding
error
Unsupported audio
source
Data rate overload
Network overload
Encoder
—
Description
No source present at the input.
Source is present, unrecognized
due to bad sync measurement.
Source is present, unable to lock
supported
Not applicable to VN-Matrix 300
Not applicable to VN-Matrix 300
The hardware is unable to
encode the input signal.
Not applicable to VN-Matrix 300
The compressed data rate is too
high.
The network is dropping too
many packets.
Action Default Settings
Check input Critical, reporting
connections; is there
an output on the loop
through connector?
Critical, reporting
Critical, reporting
Critical, reporting
N/A
N/A
N/A
Critical, reporting
N/A
Increase the Critical, reporting
compression or
reduce the required
bit rate
Warning,
reporting
VN-Matrix 300 • Alarms and SNMP 63