User’s Manual YCV 100 S-Video Encoder VYC 100N and VYC 100P Composite Video Decoder Extron USA - West Extron USA - East Extron EMEA Extron Asia Extron Japan Extron China Extron Middle East Headquarters +800.633.9876 +800.3987.6673 +800.7339.8766 +81.3.3511.7655 +400.883.1568 +971.4.2991800 68-779-01 Rev.
Page 2
Precautions Safety Instructions • English Extron’s Warranty Warning Power sources • This equipment should be operated only from the power source This symbol is intended to alert the user of important indicated on the product. This equipment is intended to be used with a main power operating and maintenance (servicing) instructions in Extron Electronics warrants this product against defects in materials and workmanship system with a grounded (neutral) conductor.
Page 3
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
................A-1 Specifications ................. A-2 Included Parts ................. A-4 Optional Accessories ............A-4 All trademarks mentioned in this manual are the properties of their respective owners. 68-779-01 Rev. C 08 08 YCV 100, VYC 100N, VYC 100P • Table of Contents...
Table of Contents, cont’d YCV 100, VYC 100N, and VYC 100P Chapter One Introduction About the YCV 100, VYC 100N and VYC 100P Features YCV 100, VYC 100N, VYC 100P • Table of Contents...
Introduction About the YCV 100, VYC 100N, and VYC 100P YCV 100, VYC 100N, and VYC 100P The Extron YCV 100 is a high-performance S-video to composite video encoder. It combines S-video Y and C (luminance and chrominance) signals into a composite video signal.
Mounting the YCV 100, VYC 100N, & VYC 100P Rack mounting For optional rack mounting, do not install the rubber feet. The YCV 100, VYCN, and VYC 100P can be set on a table or ™ Mount the YCV 100, VYC 100N, or YCV 100P, on a VersaTools mounted on a rack shelf, under a desk or tabletop, or on a rack shelf (RSF 123, Extron part #60-190-20;...
(MBB 100, Extron part #70-367-01). The back- of-the-rack mounting kit allows the device to be vertically Furniture mount the YCV 100, VYC 100N, or VYC 100P using the positioned. optional MBU 123 mounting kit (part #70-212-01) as follows:...
Installation and Operation, cont’d Projector mounting Rear Panel Features and Cabling Projector mount the YCV 100, VYC 100N, or VYC 100P using the YCV 100 optional PMK 100 mounting kit (part #70-217-01) as follows: VIDEO OUT YCV 100 Remove rubber feet if they were previously installed on the...
To verify the polarity before connection, check the no load 3/16” (5 mm) Max. power supply output with a voltmeter. Power LED — Lights to indicate that the YCV 100 is on. Orange Captive Screw Connector VYC 100N and VYC 100P...
• Problem: Some chroma crawl on the vertical edges or a rainbow effect on some images Solution: This is a normal characteristic of the unit. A ppendix A Specifications, Part Numbers, and Accessories Specifications Included Parts Optional Accessories YCV 100, VYC 100N, VYC 100P • Installation and Operation 2-10...
Page 12
YCV 100 ......12 VDC, 0.1 A Connectors Temperature/humidity ....Storage: -40 to +158 °F (-40 to +70 °C) / YCV 100 ......2 female BNC or 1 female 4-pin mini DIN 10% to 90%, noncondensing VYC 100N, VYC 100P ..1 female BNC Operating: +32 to +122 °F (0 to +50 °C) /...
Page 13
Specifications, Part Numbers, Accessories, cont’d Included Parts These items are included in each order for a YCV 100, VYC 100N, or VYC 100P: Replacement Included parts part number YCV 100 60-559-01 VYC 100N 60-558-02 VYC 100P 60-558-03 12 VDC, 1 A external power supply...
Need help?
Do you have a question about the YCV 100 and is the answer not in the manual?
Questions and answers