Start Up And Login Procedure; Login Screen - User Accounts - Extron electronics VN-Matrix 300 User Manual

Start Up and Login Procedure

The IP address of the controller is entered into the address bar of the browser in the normal
way.
Figure 13.
In the example above, the IP address of the controller is 192.168.0.101.
NOTE:
The login screen will be displayed in the browser (see figure 14).
Login Screen — User Accounts
VN-Matrix 300 has two user accounts:
z
z
Initially the password for both accounts is the same as the user name (that is, the account
name). It is recommended that these are changed once commissioning is complete.
For commissioning use the admin account and click
Figure 14.
Entering the IP Address
The IP address of the controller in your system will be different.
admin — which allows full read/write access to all setup parameters,
public — which allows read only access to setup parameters.
Login Screen
.
LOGIN
VN-Matrix 300 • System Configuration 27