Firmware, Licensing Upgrades And User Accounts; Upgrading Device Firmware - Extron electronics VN-Matrix 300 User Manual

Firmware,
Licensing
Upgrades and
User Accounts
This section describes

Upgrading Device Firmware

From time to time Extron may issue firmware upgrades for VN-Matrix 300 in order to make
new functionality available. Details of the latest firmware release will be published on our
website, www.extron.com.
Upgrades are supplied in a single file, named in the format
verx.x
the computer that you use to access the VN-Matrix 300 controller.
The update process is split into the following stages:
Stage
Upload
Prepare
Activate
Commit
All stages of the upgrade process are carried out using the web interface. It is recommended
that all VN-Matrix 300 units in the same system are upgraded to the same firmware version
to ensure full compatibility.
upgrading device firmware
is the version number. Before you start you will need to copy the upgrade file on to
Function Summary
Copy the upgrade file from the control
PC to a temporary storage area on the
VN-Matrix 300 Controller
Unpack and copy the new firmware (from
the controller) into the VN-Matrix 300
alternate flash memory.
Reboot the VN-Matrix 300 to start using
the new firmware. This is a temporary
mode that allows you to test the new
firmware. If you encounter any problems
you can back out of this mode and return
to the previous firmware version.
Reboot the VN-Matrix 300 to start using
the new firmware permanently.
VN-Matrix 300 • Firmware, License Upgrades, and User Accounts
and clock management.
upgrade_verx.x.tar
Performed On
The VN-Matrix 300 controller
only
Each VN-Matrix 300 device
including the controller
Each VN-Matrix 300 device
including the controller
Each VN-Matrix 300 device
including the controller
where
52