Specifying Whether Or Not The Destination Name Is Inserted (Mode 001) - Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

Specifying management settings

Specifying whether or not the destination name is inserted (mode 001)

Select whether or not the destination name is inserted as transmission
source information.
Factory settings
Bit
Setting
Specifying settings
The shaded cells indicate the factory settings. The page numbers on the right
side refer to the descriptions for the corresponding function.
Bit Description
7, 6, 5, -------
4, 3, 2, 1
0 Specifies whether or not the
destination name is inserted.
200/250/350
7 6 5 4 3 2 1 0
0 0 0 1 0 1 0 0 (HEX: 14)
Setting
000101
0
0
1
Description
*Do not change these bits
when specifying settings for
this function.
The destination name is not
inserted.
The destination name is in-
serted.
9
Page Ref-
erence
-------
-------
9-33