Specifying Whether Transmission Source Information Is Added When Directly Faxing Or Forwarding Received Ip Address Fax Documents (Mode 352) - Konica Minolta bizhub 350 User Manual

Specifying management settings
Specifying whether transmission source information is added when
directly faxing or forwarding received IP address fax documents (mode
352)
Specify how transmission source information is added when directly faxing
or forwarding received documents.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7
6
5
4
3, 2, 1, 0
200/250/350
7 6 5 4 3 2 1 0
1 1 0 1 0 0 0 0 (HEX: D0)
Description Setting
-------------------------- 1
Specifies how trans- 0
mission source infor-
1
mation is added with
direct faxing.
Specifies whether or 0
not a transmission
1
source information is
added to received
documents that are
forwarded.
Specifies how trans- 0
mission source infor-
1
mation is added when
a received document
is forwarded.
-------------------------- 0000
Description
*Do not change this bit.
Outside of the document
Inside the document
Not added
Added
Outside of the document
Inside the document
*Do not change these bits.
7
Page Refer-
ence
----------
----------
----------
----------
----------
7-17