The Copy Output Is Hardly Readable And Copied Poorly - Canon imageCLASS MF3010VP User Manual

The Copy Output is Hardly Readable and Copied Poorly

Is the output tray slot blocked?
NO
Is the document or paper
loaded properly?
YES
Is the appropriate paper
loaded into the machine?
YES
Have you removed the sealing
tape from the toner cartridge?
YES
Is the toner cartridge installed
properly?
YES
Is there sufficient toner in the
toner cartridge?
YES
Have you cleaned the scanning
components or fixing unit?
YES
Are you copying on the correct?
Troubleshooting
YES
NO
NO
NO
NO
NO
NO
YES
165
Remove all the obstructions.
● Load the document properly.
" Placing Documents(P. 43) "
● Load the paper properly.
" Loading Paper(P. 46) "
Load the type of paper that meets
the paper specifications.
" Supported Paper Types(P. 70) "
Remove the sealing tape from the
toner cartridge.
" Attention (Replacing the
Toner Cartridge)(P. 210) "
Install the toner cartridge properly.
" Replacing the Toner
Cartridge(P. 206) "
To view the onscreen instructions,
see the following.
" Replacing Toner
Cartridges(P. 202) "
Clean the scanning components or
fixing unit.
" Cleaning the Machine(P. 193) "
Make sure to select the appropriate
side of paper to copy your
document on, as the side to be
placed face up in the paper source
varies depending on the paper type
that you are using. If the copy result
is not satisfactory, try to copy your
document on the other side.
85RS-03U