Table of Contents
Advertisement
Click <Apply Changes> after changing one of the parameters
for the new value to take effect. If you decide to continue using
the current settings, click <Undo Changes>. Note that once you
click <Apply Changes> you can no longer undo a change.
Click <Restore Default> to return all of the configuration
parameters displayed on this screen to their default values. If
you return the parameters to the default settings, you must also
click <Apply Changes> for these changes to take effect.
Encryption
Click the Encryption tab to configure the PC Card's WEP
Encryption Keys. The 40 bit Encryption screen is shown below.
67
Advertisement
Table of Contents
