Commands - Proxim ORiNOCO AP-4900M User Manual
Hide thumbs
Also See for ORiNOCO AP-4900M:
- User manual (271 pages) ,
- Specifications (3 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Commands
This chapter contains information on the following Command functions:
•
Introduction to File Transfer via TFTP or
•
Update AP:
Download files via TFTP or HTTP to the AP.
•
Retrieve File:
Upload configuration files from the AP to a TFTP server.
•
Reboot:
Reboot the AP in the specified number of seconds.
•
Reset:
Reset all of the Access Point's configuration settings to factory defaults.
•
Help Link:
Configure the location where the AP Help files can be found.
To perform commands using the HTTP/HTTPS interface, you must first log in to a web browser. See
instructions.
You may also perform commands using the command line interface. See
information.
To perform commands via HTTP/HTTPS:
1. Click the Commands button located on the left-hand side of the screen.
Figure 6-1 Commands Main Screen
2. Click the tab that corresponds to the command you want to issue. For example, click Reboot to restart the unit.
Following a brief introduction to TFTP and HTTP file transfer, each Commands tab is described in the remainder of this
chapter.
HTTP: Describes the available file transfer methods.
AP-4000/4000M/4900M User Guide
Command Line Interface (CLI)
6
Logging In
for
for more
149
Advertisement
Table of Contents
