Removing The Ultra 60 Side Access Cover - Sun Microsystems Ultra 80 Upgrade Manual

3.2 Removing the Ultra 60 Side Access
Cover
1. Use a No. 2 Phillips screwdriver to disconnect the lock block (
FIGURE 3-2
2. Remove the side access cover as follows (
a. Lay the system on its side in the service position.
b. Grasp the side panel and pull it toward the back of the system.
c. Disengage the side access cover from the chassis hooks.
d. Grasping the access cover sides, lift the side access cover upward and remove.
Lock block
Ultra 60 Lock Block Location
Chapter 3
):
FIGURE 3-3
Upgrading from an Ultra 30 or an Ultra 60 System
).
FIGURE 3-2
3-3