Loading/Replacing Paper; Replacing/Cutting Roll Paper - Xerox Wide Format IJP 2000 User Manual

1.5
1.5.1
Load roll paper in the Roll Unit.
1
Once the paper has been loaded, cut the leading edge of the paper.
This product uses roll printing paper. Be careful not to drop it as it is heavy and may cause injuries.
When loading roll paper, be careful not to pinch your fingers.

Important
When removing the piece of tape holding the edge of the roll paper from unraveling, make sure to completely

remove the adhesive. If the adhesive gets inside the machine, print quality may decrease.
When loading paper of different type, size, or weight, change the paper settings after you finish loading the

paper. For information on how to do this, refer to "1.6 Configuring Paper Setting" (p. 43).
Steps
1.
Have a new roll paper ready.
2.
Pull out the roll unit.
Note
3.
Remove the core of the roll paper from the roll unit.

1.5 Loading/Replacing Paper

38

Loading/Replacing Paper

Replacing/Cutting Roll Paper

When you want to just cut the leading edge of the roll

paper without replacing with new roll paper, go to Step
9.
CAUTION