Nexcom APPC 1230T User Manual page 117

Chapter 4: BIOS Setup
South Bridge
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot
[HD Audio]
Azalia Controller
[Enabled]
SMBus Controller
High Precision Event Timer Configuration
[Enabled]
High Precision Timer
[Power On]
Restore AC Power Loss
[Enabled]
Blue-tooth
[Enabled]
Beep
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Azalia Controller
This section disables Azalia or enables HD Audio.
SMBus Controller
This section is used to disable or enable SMBus controller.
High Precision Timer
This section is used to configure High Precision Event Timer.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
Security Save & Exit
Azalia Controller
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Restore AC Power Loss
Power Off
When power returns after an AC power failure, the system's power is
off. You must press the Power button to power-on the system.
Power On
When power returns after an AC power failure, the system will automatically
power-on.
Last State
When power returns after an AC power failure, the system will return
to the state where you left off before power failure occurs. If the
system's power is off when AC power failure occurs, it will remain
off when power returns. If the system's power is on when AC power
failure occurs, the system will power-on when power returns.
Blue-tooth
Enables or disables blue-tooth, settings for the optional Bluetooth module
QCOM:QBTM400-01(V7).
Beep
Enables or disables beep.
101
APPC 1230T/1231T/1235T/1530T/1531T/1730T/1731T/1930T/1931T User Manual