Related Manuals for Nexcom eLITE610
Summary of Contents for Nexcom eLITE610
- Page 1 NEXCOM International Co., Ltd. IoT Automation Solutions Business Unit HMI Panel PC eLITE610 User Manual NEXCOM International Co., Ltd. www.nexcom.com Published March 2017...
-
Page 2: Table Of Contents
Mechanical Dimensions ................4 Reset Button ..................15 BIOS Programming (For Debug Only) ..........16 Chapter 2: Jumpers and Connectors LCD Backlight Connector ...............16 Before You Begin ..................5 LVDS Panel Connector ..............17 Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... - Page 3 About BIOS Setup .................35 When to Configure the BIOS ..............35 Default Configuration ................36 Entering Setup ..................36 Legends ....................36 BIOS Setup Utility ..................38 Main ....................38 Advanced ..................39 Chipset ....................46 Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
-
Page 4: Preface
No describes how to keep the system CE compliant. part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written consent from NEXCOM Declaration of Conformity International Co., Ltd. -
Page 5: Rohs Compliance
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force to implement the introduction of green products. -
Page 6: Warranty And Rma
2. For NEXCOM Panel PC product lines (the IPPC, APPC and MPPC series), NEXCOM in advance. they are also guaranteed against defect in materials and workmanship for the period of twenty-four (24) months in their motherboard design. - Page 7 RMA that NEXCOM has determined not to be covered by the warranty will customer registered delivery address will incur an extra shipping charge, be charged the NEXCOM Standard Repair Fee for the repairing. If a RMA is the customer is responsible for paying the extra shipping charges, duties, determined to be not repairable, customer will be notified and product(s) and taxes of this shipment.
- Page 8 Basic Labor Cost and Testing Fee: as Table listed. b. Parts Fee: NEXCOM will charge for main IC chipsets such as the N.B., S.B., Super-IO, LAN, Sound, Memory, and so on. c. 3rd-party Device Fee: products replacement for CPU, DIMM, HDD, Chassis, and UPS.
-
Page 9: Safety Information
Caution: FOR USE IN A CONTROLLED ENVIRONMENT, REFER TO MANUAL FOR ENVIRONMENTAL CONDITIONS. CAUTION! CAUTION! CAUTION! Attention: POUR UTILISATION EN ATMOSPHERE CONTROLEE, CONSULTER LA NOTICE TECHNIQUE. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 10: Safety Precautions
RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS. 10. All cautions and warnings on the equipment should be noted. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 11: Technical Support And Assistance
Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2. -
Page 12: Global Service Contact Information
13F, No.920, Chung-Cheng Rd., ZhongHe District, Beijing, 100094, China New Taipei City, 23586, Taiwan, R.O.C. Tel: +86-10-5704-2680 Tel: +886-2-8226-7796 Fax: +86-10-5704-2681 Fax: +886-2-8226-7792 Email: sales@nexcom.cn Email: sales@nexcom.com.tw www.nexcom.cn www.nexcom.com.tw Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... - Page 13 Hui Yin Ming Zun Building Room 1108, Building No. 11, 599 Yunling Road, Putuo District, Shanghai, 200062, China Tel: +86-21-6125-8282 Fax: +86-21-6125-8281 Email: frankyang@nexcom.cn www.nexcom.cn xiii Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
-
Page 14: Ordering Information
® Atom™ x5-E3930, Ethernet and USB 3.0 interfaces, JMobile run-time • eLITE610 (P/N: 10IE0061001X0) 10.1” widescreen WSVGA with Intel Atom™ x5-E3930, Ethernet and USB ® 3.0 interfaces Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 15: Chapter 1: Product Introduction
▪ 1x RS232/422/485 communication port ▪ Extremely cost efficient HMI with plastic chassis ▪ Slim design, mounting depth less than 30mm ▪ System frame ground protection (GPE) design Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 16: Specifications
▪ Serial: 1x RS232/422/485 BIOS configuration Ratings ▪ Power supply voltage: 24 Vdc (19.2 to 28.8 Vdc) ▪ Current consumption: 1.64A at 24Vdc (max.) ▪ Weight: Approx. 1.37kg Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 17: Knowing Your Elite610
Used to connect the system to a local area network. VESA Mounting Holes These are the mounting holes for VESA mount (100x100mm). VESA Mounting Hole USB 3.0 LAN2 USB 3.0 DC Input LAN1 Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 18: Mechanical Dimensions
Chapter 1: Product Introduction Mechanical Dimensions 282 (OUTLINE) 33.8 270 (MOUNTING LINE) 224.32 (V/A) 28.84 Active Area(222.72*125.28) Active Center CUT OUT SIZE T= 6mm (MAX) / 1mm (MIN) Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 19: Chapter 2: Jumpers And Connectors
Ground yourself before touching any internal components, by touching over tighten screws. a metal object. Static electricity can damage many of the electronic components. Humid environments tend to have less static electricity than Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 20: Jumper Settings
Refer to the illustrations below for examples of what the 2-pin and 3-pin jumpers look like when they are short (on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 are Short Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 21: Locations Of The Jumpers And Connectors
Chapter 2: Jumpers and Connectors Locations of the Jumpers and Connectors Top View JP10 USB3 MINIPCIE1 USB4 DEBUG1 JFW1 USB1 USB2 COM1 LAN2 LAN1 Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 22: Bottom View
Chapter 2: Jumpers and Connectors Bottom View Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 23: Jumpers And Dip Switch Settings
AT Mode 2-3 On Clear BIOS 2-3 On ATX Mode 1-2 On: default 2-3 On: default Definition Definition AUTO (AT MODE) RTC Power PWRBT In Manual (ATX MODE) Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 24: Panel Resolution Select
Connector location: SW1 Connector location: SW2 1 2 3 4 SW1-1 SW1-2 SW1-3 SW1-4 Resolution Type SW2-1 SW2-2 1024 x 600 (WSVGA) LCDPWM_REVERSE BACKLIGHT_REVERSE SW2 (OFF, OFF): default Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 25: Connector Pin Definitions
Connector type: DB-9 port, 9-pin D-Sub Connector location: PW1 Connector location: COM1 Definition Definition Definition Power in + COM1_DCD COM1_RXD Power in - COM1_TXD COM1_DTR Mechanical GND COM1_GND COM1_DSR COM1_RTS COM1_CTS COM1_RI Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 26: Lan1 Port
Definition LAN_MDI0P_1 LAN_MDI0N_1 LAN2_MDI0P LAN2_MDI0N LAN_MDI1P_1 LAN_MDI1N_1 LAN2_MDI1P LAN2_MDI1N LANTCT LAN2TCT LAN_MDI2P_1 LAN_MDI2N_1 LAN2_MDI2P LAN2_MDI2N LAN_MDI3P_1 LAN_MDI3N_1 LAN2_MDI3P LAN2_MDI3N LAN_LED_LINK# LAN_LED_LINK1G# LAN2_LED_LINK# LAN2_LED_LINK1G# LAN_LED_ACT# 3VSB LAN2_LED_ACT# 3VSB Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 27: Usb 3.0 Port 1
Connector type: USB 3.0 port, Type A Connector location: USB1 Connector location: USB2 Definition Definition Definition Definition USB0- USB1- USB0+ USB1+ USB3_RX- USB3_RX+ USB3_RX- USB3_RX+ USB3_TX- USB3_TX- USB3_TX+ USB3_TX+ Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 28: Internal Connectors
DC Input Connector Connector type: 1x4 4-pin header, 2.0mm pitch Connector type: 1x4 4-pin header, 2.0mm pitch Connector location: JP3 Connector location: JP4 Definition Definition Definition Definition Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 29: Power Button
Power Button Reset Button Connector type: 1x2 2-pin header, 2.0mm pitch Connector type: 1x2 2-pin header, 2.0mm pitch Connector location: JP2 Connector location: JP1 Definition Definition PWRBT RESET Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 30: Bios Programming (For Debug Only)
Connector type: 1x7 7-pin header, 1.25mm pitch Connector type: 2x3 6-pin header, 2.0mm pitch Connector location: J3 Connector location: JFW1 Definition Definition Definition Definition 1.8V VCC5 SPI_CS# SPI_CK BKCTRL SPI_SO SPI_SI BKLEN Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 31: Lvds Panel Connector
AX2-_N LVDS_DAT6 LVDS_DAT2 AX2+_P VCC_LCD VCC_LCD CLK_X-_N CLK_X+_P LVDS_DAT7# LVDS_CLK1# AX3-_N LVDS_DAT7 LVDS_CLK1 AX3+_P VCC_LCD VCC_LCD LVDS_CLK2# LVDS_DAT3# Bit select LVDS_CLK2 LVDS_DAT3 AVDD LED- LED- LED+ LED+ Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 32: Lvds Touch Fpc Connector
Connector location: CN3 Connector location: J4 Definition Definition 4-Wire 5-Wire Y_Up X_Left Bottom UR (H) Y_Down X_Right Right LR (X) Sense (S) UL (Y) Left LL (L) Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 33: Usb Connector (Dongle)
Internal USB Connector Connector type: USB port Connector type: 1x4 4-pin header JST, 2.0mm pitch Connector location: USB3 Connector location: USB4 Definition Definition Definition Definition USB3- USB4- USB3- USB4+ Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 34: Tpm/Debug Port Connector
Connector type: 1x3 3-pin header, 1.25mm pitch Connector location: DEBUG1 Connector location: JP8 Definition Definition Definition Reset# LPC_CLK LPC_FRAME# EC_I2CDATA LPC_AD3 LPC_AD2 EC_I2CCLK LPC_AD1 LPC_AD0 LPC_SERIRQ 3.3V Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 35: Led Connector
Connector type: 1x5 5-pin header JST, 2.0mm pitch Connector type: 1x3 3-pin header, 1.25mm pitch Connector location: J1 Connector location: JP10 Definition Definition Definition HDDLED# VCC5 ATX_PWRBTN#_RE Standby Power 5V Power LED 5V SOC_SLP_S3_N_RE Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 36: Sata Connector
Connector type: 1x7 7-pin header, 1.27mm pitch Connector type: 1x2 2-pin header, 2.5mm pitch Connector location: CN5 Connector location: J5 Definition Definition Definition SATA_TXP1_C VCC5 SATA_TXN1_C SATA_RXN1_C SATA_RXP1_C Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 37: Sim Card Socket
Chapter 2: Jumpers and Connectors SIM Card Socket Connector location: CN2 Definition Definition UIM_PWR UIM_RST UIM_CLK UIM_VCCP UIM_DAT Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 38: Mini-Pcie Slot (Pcie/Msata/3G)
+V1.5S_MINI SMB_CLK +V1.5S_MINI PCIE_TX3N/mSATA_TxN SMB_DAT PCIE_CLKREQ2# UIM_PWR PCIE_TX3P/mSATA_TxP UIM_DATA USB_5N GPP_CLK1_N UIM_CLK USB_5P GPP_CLK1_P UIM_RESET +V3.3A_MINI UIM_VPP +V3.3A_MINI MINICARD1_DIS# PCIE_RST# +V1.5S_MINI PCIE_RX2N/mSATA_RxP +V3.3A_MINI PCIE_RX2P/mSATA_RxN PCIE/mSATA detect +V3.3A_MINI Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 39: Chapter 3: System Setup
1. Locate and remove the mounting screws on the rear chassis cover, then remove the cover from the system. 1. Locate the standoffs for installing the TPM module. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... - Page 40 2. Align the mounting holes on the TPM module to the standoffs and 3. Connect the TPM cable to the TPM connector on the module. secure the module with screws. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 41 Chapter 3: System Setup 4. Connect the other end of the TPM cable to the TPM connector on the motherboard. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
-
Page 42: Installing A Sim Card And Mini-Pcie Module
Chapter 3: System Setup Installing a SIM Card and Mini-PCIe Module 1. Locate the SIM card slot on the motherboard. 2. Lift up the SIM card cover. SIM Card Slot Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... - Page 43 Chapter 3: System Setup 3. Place the SIM card into the slot. 4. Close the cover and secure the SIM card into position. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 44 5. Insert the mini-PCIe module into the mini-PCIe slot at a 45 degrees angle 6. Secure the module with mounting screws. until the gold-plated connector on the edge of the module completely disappears inside the slot. Mini-PCIe Slot Mini-PCIe Module Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 45 8. Insert and secure ring 2 onto the antenna jack end of the cable. right of the system, and insert ring 1 onto the antenna jack end of the cable. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 46 9. Attach the end of the RF cable onto the RF antenna connector on the 10. Secure the rear chassis cover back to the system and connect an mini-PCIe module. external antenna to the antenna jack. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
-
Page 47: Installing An Internal Usb Key
USB key. Once the fixing bracket is firmly seated against the end of the USB key, fasten the screw to secure the bracket in place. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 48: Panel Mounting
Panel Mounting 1. Select a place on the panel where you will mount eLITE610. 3. Slide eLITE610 through the hole until it is properly fitted against the panel. 2. Cut out a shape on the panel that corresponds to the rear dimensions of eLITE610. -
Page 49: Chapter 4: Bios Setup
This chapter describes how to use the BIOS setup program for eLITE610. The The settings made in the setup program affect how the computer performs. BIOS screens provided in this chapter are for reference only and may change if It is important, therefore, first to try to understand all the setup options, and the BIOS is updated in the future. -
Page 50: Default Configuration
Powering on the computer and immediately pressing <Del> allows you to enter Setup. Load optimized default values. Press the key to enter Setup: Saves and exits the Setup program. Press <Enter> to enter the highlighted sub-menu Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... - Page 51 When “” appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
-
Page 52: Bios Setup Utility
Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc. hours from 00 to 23. Minute displays minutes from 00 to 59. Second displays seconds from 00 to 59. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 53: Advanced
Security Device. TCG EFI protocol and INT1A interface will not be available. F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... - Page 54 ACPI Sleep State Select the highest ACPI sleep state the system will enter when the suspend button is pressed. The options are Suspend Disabled and S3 (Suspend to RAM). Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 55 Onboard Serial Port Mode Select this to change the serial port mode to RS232, RS422, RS485 or RS485 Auto. Terminal Resistor Enables or disables the terminal resistor. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 56 Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc. CPU Temperature Detects and displays the current CPU temperature. System Temperature Detects and displays the current system temperature. Vcore Detects and displays the Vcore voltage. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 57 When this field is set to Enabled, the VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. VT-d Enables or disables VT-d function on MCH. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 58 F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc. Network Stack Enables or disables UEFI network stack. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 59 This is a workaround for OSs that does not support XHCI hand-off. The XHCI ownership change should be claimed by the XHCI driver. USB Mass Storage Driver Support Enables or disables USB mass storage driver support. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
-
Page 60: Chipset
Backlight Dimming Control Select Configures the backlight to 100% or OS mode. Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc. Setting incorrect field values may cause the system to malfunction. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... - Page 61 ESC: Exit ESC: Exit Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc. Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc. SMBus Support Enables or disables SMBus support. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 62 2 black internal SATA ports (up to 3Gb/s supported per port). MINIPCIE1 Enables or disables Mini-PCIe1 port. MSATA Enables or disables the mSATA port. SATA Enables or disables the SATA port Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
- Page 63 USB devices will not be detectable and usable during boot up and in OS. Please do not disable it unless for debugging purposes. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...
-
Page 64: Security
Enables or disables high precision event timer. User Password State After G3 Select this to reconfigure the user’s password. Configures the power state when power is re-applied after a power failure (G3 state). Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 65: Boot
NumLock on wherein the function of the numeric keypad is the number keys. When set to Off, the function of the numeric keypad is the arrow keys Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 66: Save & Exit
To launch EFI shell from a filesystem device, select this field and press Save Changes and Reset <Enter>. To save the changes and reset, select this field then press <Enter>. A dialog box will appear. Confirm by selecting Yes. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual... -
Page 67: Appendix A: Adjusting Screen Brightness
PPendIx dJustIng Creen rIghtness 1. In the Windows Control Panel menu, select Power Options. 2. Move the Screen brightness slider to adjust the screen brightness. Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved. eLITE610 User Manual...