Page 1
NEXCOM International Co., Ltd. Intelligent Platform & Services Business Unit Open Frame Panel PC OPPC 1240T/1540T/1740T/1940T Series User Manual NEXCOM International Co., Ltd. www.nexcom.com Published September 2017...
No describes how to keep the system CE compliant. part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written consent from NEXCOM Declaration of Conformity International Co., Ltd.
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force to implement the introduction of green products.
2. For NEXCOM Panel PC product lines (the APPC, MPPC series), they are NEXCOM in advance. also guaranteed against defect in materials and workmanship for the period of twenty-four (24) months in their motherboard design.
Page 7
RMA that NEXCOM has determined not to be covered by the warranty will customer registered delivery address will incur an extra shipping charge, be charged the NEXCOM Standard Repair Fee for the repairing. If a RMA is the customer is responsible for paying the extra shipping charges, duties, determined to be not repairable, customer will be notified and product(s) and taxes of this shipment.
Page 8
Basic Labor Cost and Testing Fee: as Table listed. b. Parts Fee: NEXCOM will charge for main IC chipsets such as the N.B., S.B., Super-IO, LAN, Sound, Memory, and so on. c. 3rd-party Device Fee: products replacement for CPU, DIMM, HDD, Chassis, and UPS.
Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2.
The thickness of the panel (e.g. steel board, plank, acrylic board, wall, etc.) where you will mount the Panel PC must not exceed 5mm for OPPC 1240T series and 7mm for OPPC 1540T/1740T/1940T series. If the distance between the front bezel and panel mount hole is too wide, it will not fit the panel mount kit.
BIOS is updated in the future. second, to make settings appropriate for the way you use the computer. To check for the latest updates and revisions, visit the NEXCOM website at When to Configure the BIOS www.nexcom.com.tw.