Eap-Peap Settings - AMX Modero ViewPoint MVP-7500 Operation/Reference Manual

Amx modero viewpoint mvp-7500 touch panels: reference guide
Hide thumbs Also See for Modero ViewPoint MVP-7500:
Table of Contents

Advertisement

Setup Pages
EAP-FAST Settings (Cont.)
PAC File Location:
Save/Cancel:

EAP-PEAP Settings

Press the EAP-PEAP button to open the EAP-PEAP Settings page (FIG. 63).
FIG. 63
Wireless Settings page - EAP-PEAP Settings
PEAP (Protected Extensible Authentication Protocol) was developed as a way to securely transmit
authentication information, such as passwords, over a wireless network environment. PEAP uses only
server-side public key certificates and therefore does not need a client (panel) certificate which makes
the configuration and setup easier.
There are two main versions of the PEAP protocol supported by panel's DeviceScape Wireless Client:
PEAP uses inner authentication mechanisms supported by the DeviceScape Wireless Client, the most
common of which are:
78
This field is used when the previous Automatic PAC Provisioning option has
been Disabled.
• When pressed, the panel displays an on-screen PAC File Location
keyboard which allows you to enter the name of the file containing the PAC
shared secret credentials for use in authentication.
• This field is only valid when the automatic PAC provisioning feature has
been enabled via the previous field.
• Save - store the new security information, apply changes, and return to the
previous page.
• Cancel - discard changes and return to the previous page.
Refer to the EAP Authentication section on page 155 for further details on these security
options.
Refer to the Using the Site Survey tool section on page 22 for more information on using this
feature.
PEAPv0
PEAPv1
MSCHAPv2 with PEAPv0
GTC with PEAPv1
MVP Modero ViewPoint Touch Panels

Advertisement

Table of Contents
loading

This manual is also suitable for:

Modero viewpoint mvp-8400

Table of Contents