Table 6.8 Messages In The [Initial Settings] Window; Table 6.9 Messages In The [Importation Of The Remcs Settings] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0006
RMG_0011
RMG_0025
RMG_0026
RMG_0027

TABLE 6.9 Messages in the [Importation of the REMCS settings] window

Message code
RMG_0002
RMG_0004
RMG_0015
RMG_0027
RMG_0032
RMG_0033
RMG_0036
RMG_0096
RMG_0118
RMG_0142
RMG_0143
RMG_0144
RMG_0194
RMG_0196

TABLE 6.8 Messages in the [Initial Settings] window

Message
Failed to get Machine status. (xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to get connect mode. (xxx)
Initial Settings frame display completed.
Failed to set connection mode. (xxx)
Changed connection mode to xxx.
Failed to change Machine status. (xxx)
Message
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Invalid entry.
Failed to change Machine status. (xxx)
The specified file can not be imported.
Invalid directory name specified.
Required entry.
The specified file includes an unsupported
connection type. The environment information
cannot be imported.
Failed to import the environment information
and the customer information.(xxx)
The file doesn't exist in the selected directory.
Invalid REMCS environment information file.
Invalid customer information file.
Automatic registration failed, because there
was no required entry in the Customer
information file.
Failed to delete personal information.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Correct the entered value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Specify a valid file.
Specify a valid directory
name.
Enter a valid value.
Specify a file with the same
connection type.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Specify the directory in
which the file is located.
Specify a valid file and try
again.
Check the customer
information file contents,
correct the error, and then
try again.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
54
Action
Action
CA92344-0542-02