Coolant Pump Shaft Assembly; Slider Assembly In The Lower Area - Husqvarna TC 449 2011 I.E. Workshop Manual

H01946
H01944
ENGINE DISASSEMBLY/REASSEMBLY
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Coolant pump shaft assembly

• Lubricate bearing (5), and shaft (3).
Molykote D Paste
• Assemble bearing (5) and stop ring (4) onto shaft (3).
• When fitting the shaft, take special care to the timing chain.
• Fit shaft (3) with front bearing (5).
• Assemble the following parts:
- Stop ring (2)
- Oil seal (1)

Slider assembly in the lower area

• Fit screw with O-Ring (1).
Front slider at crankcase lower part
M8
Consumables
Clear solid lubricant for metal
part assembling and settling
Tightening torque figures
15 Nm
F1.41
Workshop Manual Ed. 03-2012