Installing Telanophy From A Cd - NEC Xen IPK Installation Manual

June 2004
S 12
E C T I O N
I
NSTALLING
T LAN
E OPHY FROM A
CD
82 - Chapter 6
To install TeLANophy from a CD
1 At the workstation, insert the voice
messaging support CD in the CD-ROM drive.
2 Choose "Start," and then choose "Run."
3 Refer to the table on page 81 for the TeLANophy application path. Type
<TeLANophy CD directory path>\setup
and choose "OK."
Warning! ViewMail and ViewFax must be installed in the default directories. If View-
Mail is already in stalled, do not install ViewCall Plus in the same directory, or both programs
may not work properly. ViewFax must be installed after ViewMail for Microsoft Messaging
(VMM), or both programs may not work properly.
4 In the Welcome dialogue box, choose "Next."
5 In the Information dialogue box, choose "OK."
6 Perform one of the following:
• If you are installing ViewCall Plus, in the Install Options dialogue box, select
"Local installation."
• If you are not installing ViewCall Plus, continue with step 7.
7 Follow the on-screen instructions to complete the installation.
NEC Business Solutions Ltd
Setting Up TeLANophy