Telanophy Workstation Installation Overview; Installing Viewfax - NEC Xen IPK Installation Manual

Xen IPK Xen Mail CTI Installation Guide
S 11
E C T I O N
T LAN
E OPHY
WORKSTATION
INSTALLATION
OVERVIEW
Setting Up TeLANophy
The installation files for TeLANophy applications are stored on the voice
messaging system's disc. There are two ways that you can install
TeLANophy applications on individual workstations:
• You can take the voice messaging system's disc to each workstation and install
TeLANophy applications from the disc. To use this method, see "Installing TeL-
ANophy from a CD" on page 82.
• You can copy the TeLANophy application install files to a network drive and then
install them on individual workstations from the network. See "Installing TeL-
ANophy from a network" on page 83.
Refer to the following table to determine the correct file path when you
install TeLANophy applications using either method.

Installing ViewFax

When installing ViewFax on Windows 98 or later, the installation may stop
and return an error message about the Daemon.exe file. If this happens,
press CTRL-ALT-DEL and go to the task manager or close program box.
Highlight Daemon.exe and click "End Task" or "End Process." Return to the
ViewFax installation window and click "Retry" to continue.
TeLANophy application paths
Application
ViewMail
ViewCall Plus
ViewFax
ViewMail for Microsoft Messaging
Disc directory path
\Viewapps\Viewmail\Full
\Viewapps\Vcp\Full
\Viewapps\Viewfax\Full
\Viewapps\Vmm\Full
Chapter 6 - 81