NEC Xen IPK Installation Manual page 21

Hide thumbs Also See for Xen IPK:
Table of Contents

Advertisement

Xen IPK Xen Mail CTI Installation Guide
Setting Up the System
To make the live record setting available by class of service
Memory block 1-8-08 enables the selected class of service to use the live
record feature from the phone.
1 Press the LK1 key.
2 Press the LK8 key.
3 Dial 08.
4 Enter the class of service number.
5 Press the RECALL key to advance to page 4.
6 Press the LK5 key to make the live record setting available to the
selected class of service.
7 Press the TRANSFER key to save the selection and advance to the next
class of service.
8 Repeat steps 5 through 7 for each class of service.
9 Press the ANSWER key twice to exit the station class of service
assignment.
To allow the voice messaging system to use a barge-in code for live
record
1 Press the LK1 key.
2 Press the LK8 key.
3 Dial 08.
4 Enter the class of service number for the voice messaging system ports.
5 The LK4 key is lit when voice messaging system trunk lines are enabled
to receive a barge-in code. Press the LK4 key if it is not already lit.
6 Press the TRANSFER key to save the selection.
7 Press the ANSWER key twice to exit the station class of service
assignment.
To allow individual stations to receive a barge-in code for live record
1 Press the LK1 key.
2 Press the LK8 key.
3 Dial 08.
4 Enter the class of service number.
5 The LK5 key is lit when the class of service is enabled to receive a
barge-in code. Press the LK5 key if it is not already lit.
6 Press the TRANSFER key to save the selection.
7 Repeat steps 4 and 5 for each class of service that requires live record.
8 Press the ANSWER key twice to exit the selection.
Chapter 2 - 15

Advertisement

Table of Contents
loading

Table of Contents