NEC Xen IPK Installation Manual page 69

Xen IPK Xen Mail CTI Installation Guide
Upgrading the Voice Messaging System
13 Review the features and options available with your new system that are
listed on-screen. Press ENTER to continue.
14 From the Add New Features menu, choose "Add new prompts" by
typing the corresponding menu number and pressing ENTER.
15 When you have completed your selection, press ENTER to continue.
16 Follow the on-screen instructions to configure the system software for
the languages that you want to add or update.
17 If you are updating an existing language, you may want to avoid
overwriting customised or rerecorded prompts. If so, at the Install All
New Prompts menu, choose "No" and then press ENTER to continue.
18 When you reach the Setup Complete menu, type y and press ENTER
to exit the Setup utility.
19 Shut down and restart the voice messaging system by setting the
board's Shutdown switch Off. After the system has shut down, set the
switch On and then press the Power button to restart.
Chapter 5 - 63