Daughter Board - NEC Xen IPK Installation Manual

Xen IPK Xen Mail CTI Installation Guide
About the System Board
Q Shutdown LED:
Red when switch is On and green when switch is Off. Once light goes out,
you can safely turn off power to the KSU and disconnect the board.
R MB LED and switch:
Do not use. Must be set On at all times and the LED red.

Daughter Board

A F206 LED
B CGA LED
C Application LED
D VM Channel 1
E VM Channel 2
F VM Channel 3
G VM Channel 4
H VM Channel 5
I VM Channel 6
J VM Channel 7
K VM Channel 8
L Fax Channel 1
M Fax Channel 2
Appendix A - 89