Tcp/Ip For Windows Nt 4.0 - NEC Xen IPK Installation Manual

June 2004
S 8
E C T I O N
TCP/IP W
FOR INDOWS
NT 4.0
78 - Chapter 6
Perform the following procedure to set up Windows NT 4.0 workstations that
use TeLANophy applications with TCP/IP.
Administrative rights are required to configure a workstation. If the buttons
are shaded, you do not have administrative rights.
To set up a Windows NT 4.0 workstation
1 From the Windows taskbar, choose "Start," choose "Settings," and then
choose "Control Panel."
2 In the Control Panel, double-click "Network."
3 Choose the Protocols tab, and check whether "TCP/IP protocol" is listed.
Then choose the appropriate scenario:
• If "TCP/IP protocol" is listed, choose "Cancel."
• If "TCP/IP protocol" is not listed, choose "Add," and then follow the on-screen
instructions to install the driver from your Windows NT 4.0 disc.
NEC Business Solutions Ltd
Setting Up TeLANophy