Preparing An Existing Support Computer - NEC Xen IPK Installation Manual

June 2004
S 3
E C T I O N
P
REPARING AN
EXISTING SUPPORT
COMPUTER
28 - Chapter 3
If your support computer uses MS-DOS remote software to support other
voice messaging systems, perform the following procedure before installing
the CoSession Windows remote software.
This procedure is necessary to prevent the CoSession Windows remote
software installation from overriding the MS-DOS remote software settings.
To save the support computer's MS-DOS remote access software
settings
1 Before updating the software, record the following information:
• The COM port for the modem.
• The type of modem installed.
• The logon name, password, and phone number for each phone book entry
set up.
2 Using a text editor, open the computer's Autoexec.bat file.
3 If the Rr.bat file is being launched, type
that starts the Rr.bat file.
If the Rr.bat file is not listed, continue with step 4.
4 Save and close the file.
5 Shut down and restart the support computer.
6 Install the CoSession Windows remote software as described in "To
install remote access software" on page 8.
NEC Business Solutions Ltd
at the beginning of the line
rem
Remote Access