Using The Os/2 Host Process Switcher - NEC Xen IPK Installation Manual

June 2004
S 6
E C T I O N
U OS/2
SING THE HOST
PROCESS SWITCHER
34 - Chapter 3
Once you establish a remote access connection with the voice messaging
system, you can use the OS/2 Host Process Switcher to switch between
applications. In addition, you can use the Process Switcher to open an OS/2
command prompt necessary to access files or customise settings on the
voice messaging system.
To use the OS/2 Host Process Switcher
1 Establish a remote access connection.
2 From the CoSession Remote Viewer Control Center window, press ESC
and release. Then quickly press ALT to display the OS/2 Host Process
Switcher window. (You may need to try this a few times.)
3 Perform one of the following actions:
• Type 0 and press ENTER to open an OS/2 command prompt.
• Type the appropriate number to select "Voice mail for OS/2" and press
ENTER to view the voice messaging system screens.
Avoid typing
CAUTION:
behave erratically and you may lose your ability to access the voice
messaging system application. For the same reason, avoid opening a
DOS window.
in an OS/2 window. This may cause the system to
exit
NEC Business Solutions Ltd
Remote Access