NEC Xen IPK Installation Manual page 22

June 2004
16 - Chapter 2
To assign the extension number of the voice messaging system for live
record
Memory block 1-8-26 identifies the voice messaging ports available for live
record.
1 Press the LK1 key.
2 Press the LK8 key.
3 Dial 26.
4 Enter the extension number of the voice messaging system hunt group
master port.
5 Press the TRANSFER key to save the port settings.
6 Press the ANSWER key twice to exit the port assignment for live record.
To assign feature access keys
Memory block 4-12 assigns line keys as feature access keys. Program each
line key as a feature access key to allow live record on individual
extensions.
1 Press the LK4 key.
2 Dial 12.
3 Press * four times, followed by the port number of the extension that you
want to program.
4 Enter the first line key number (for example, 09) to be assigned as a
feature access key.
5 Press the LK6 key.
6 Enter the feature access key number (01-10).
7 Press the TRANSFER key to save the key assignment and advance to
the next line key number.
8 Repeat steps 5 through 7 for each line key.
9 Repeat steps 3 through 8 for the remaining extensions that will use live
record.
10 Press the SPEAKER key to exit programming mode.
To program individual stations for call forward on all calls
1 Go off hook.
2 Dial 41, then enter the extension number of the first DVM port.
3 Hang up.
NEC Business Solutions Ltd
Setting Up the System