NEC Xen IPK Installation Manual page 20

June 2004
14 - Chapter 2
To make the call forwarding on busy/no answer setting available by class
of service
Memory block 1-8-08 enables the selected class of service to forward calls
on busy/no answer.
1 Press the LK1 key.
2 Press the LK8 key.
3 Dial 08.
4 Enter the class of service number.
5 Press the RECALL key.
6 The LK5 key is lit when the forwarding on busy/no answer setting is
available to the selected class of service. Press the LK5 key if it is not
already lit.
7 Press the TRANSFER key to save the selection and advance to the next
class of service.
8 Repeat steps 5 through 7 for each class of service that requires call
forwarding busy/no answer.
9 Press the ANSWER key twice to exit the station class of service
assignment.
To enable live record by trunk
Memory block 3-45 selects the live record feature for each CO line.
1 Press the LK3 key.
2 Press the TRANSFER key.
3 Dial 45.
4 Press * twice, then enter the CO line number.
5 Press the LK2 key to enable live record on this CO line.
6 Press the TRANSFER key to save the live record setting.
7 Press * twice.
8 Dial 45.
9 Press the CONF key to advance to the next CO line.
10 Repeat steps 5 through 9 for each CO line that will use live record.
11 Press the ANSWER key to exit live record trunk selection.
NEC Business Solutions Ltd
Setting Up the System