Netware Connection - NEC Xen IPK Installation Manual

June 2004
48 - Chapter 4
6 Delete the default by typing
net user admin /delete
and pressing ENTER.
7 Log off the new admin by typing logoff and pressing ENTER.

NetWare connection

To set the voice messaging system to log on and attach to a Novell NetWare
network, you need to edit three files: Nconnect.cmd, Rconnect.cmd, and
Startit.cmd. To do so, perform the following three procedures.
To edit the Nconnect.cmd file
1 Shut down the voice messaging system application by pressing ESC at
the Banner screen and then following the system prompts.
2 To open an OS/2 command prompt from the voice messaging system
screens, do one of the following:
• If you are using a monitor, keyboard, and mouse plugged into the voice mes-
saging system board to access the voice messaging system screens, go to
the OS/2 desktop and select the OS/2 Window icon.
• If you are using a remote access connection to access the voice messaging
system screens, switch to the
OS/2 Host Process Switcher window. Type
text session" and press ENTER.
3 At the OS/2 command prompt, type e: and press ENTER.
4 Type cd \vmail and press ENTER.
5 Make a backup copy of the Nconnect.cmd file.
6 Using the OS/2 tedit text editor, open the Nconnect.cmd file. To do so,
type
tedit nconnect.cmd
and press ENTER.
Refer to the text editor's online help for instructions on using this
NOTE:
text editor.
7 Go to the end of the file.
8 Add commands that are specific to the network. For more information,
refer to the documentation that comes with the network. For example,
type:
login server_one/username
map j:=server_one\admin:
attach server_two/username
map k:=server_two\
accounting:
map l:=server_two\develop:
9 Save the file and close it.
You can log on to only one server, but you can attach to as many
NOTE:
NEC Business Solutions Ltd
to choose "Start a new 0S/2
0
Backing Up & Restoring the System