Configure Ip Address - Planet WSD-800 Quick Installation Manual

4. Configure IP address

The default IP address of the Switch is "192.168.0.100". If you want to change
the IP address, for example, change the IP address to "192.168.99.234" with
subnet mask. "255.255.255.0", please enter the
command:
set system ip 192.168.99.234 255.255.255.0
As show in Figure 4-1.
Figure 4-1 Set IP address
Now the IP address has changed to 192.168.99.234. The changed IP address will
remain the original after reboot unless you save the configuration. To do this, enter
"copy config flash" to save the configuration. As show in Figure 4-2.
Figure 4-2 Save configuration