Table of Contents
Advertisement
4.16 Power over Ethernet
Providing up to 24 PoE, in-line power interface, the WGSW-2620HP PoE Switch can easily build a power central-controlled
IP phone system, IP Camera system, AP group for the enterprise. For instance, 24camera / AP can be easily installed
around the corner in the company for surveillance demands or build a wireless roaming environment in the office. Without
the power-socket limitation, the PoE Switch makes the installation of cameras or WLAN AP more easily and efficiently.
4.16.1 Power over Ethernet Powered Device
3~5 Watts
6~12 Watts
10~12 Watts
3~12 Watts
3~25 Watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where UPS is installed for
un-interrupt power system and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation.
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC sockets.
PoE Splitter
PoE Splitter split the PoE 52V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and
reduces the installation time.
High Power PoE Splitter
High PoE Splitter split the PoE 52V DC over the Ethernet cable into 5/12V
DC power output. It frees the device deployment from restrictions due to
power outlet locations, which eliminate the costs for additional AC wiring
and reduces the installation time.
136
User's Manual of WGSW-2620HP
Advertisement
Table of Contents
