Removing Right-Side Components - Arctic Cat 300 Utility Service Manual

Removing Right-Side
Components
A. Transmission (DVX)
1. Drain the transmission lubricant into a suitable con-
tainer; then install the drain plug and tighten to 21 ft-
lb.
2. Remove the drive sprocket cover; then remove the
cap screws and lock plate securing the sprocket to
the driveshaft and remove the sprocket.
3. Remove the cap screws securing the transmission
case cover to the transmission; then remove the
cover. Account for the dowel pins and gasket.
4. Remove the output driveshaft circlip; then remove
the driveshaft from the transmission case cover.
52
5. Remove the shift shaft; then remove the plug.
Account for one shift cam stopper ball, spring, and
seal/washer.
KM106
KM344A
6. Remove the shift fork guide shaft; then hold the shift
fork away from the shift cam and remove the shift cam.
KM609A
KM611A
KM677A
KM619A
KM620A