Arctic Cat 300 Utility Service Manual page 77

7. Disconnect the vent hose; then remove the carbure-
tor.
DISASSEMBLING
1. Remove the four Phillips-head screws securing the
top cover; then remove the cover.
2. Remove the vacuum piston assembly from the carbu-
retor body. Account for a spring, spring seat, and the
jet needle.
3. Remove the Phillips-head screws securing the float
chamber; then remove the chamber. Account for the
O-ring.
74
PR162B
4. Remove the float pin.
KC0019A
5. Lift the float assembly from the carburetor. Account
for the float valve.
KC0021A

NOTE: Note the locations of the jets, pilot screw,
and holder for disassembling procedures.
KC0022A
KC0063A
KC0024A
CC753