Removing Right-Side Components - Arctic Cat ATV 250 Utility 2009 Service Manual

Removing Right-Side
Components
A. Transmission (DVX 300)
1. Drain the transmission lubricant into a suitable
container; then install the drain plug and tighten to
21 ft-lb.
2. Remove the drive sprocket cover; then remove the
cap screws and lock plate securing the sprocket to
the driveshaft and remove the sprocket.
3. Remove the cap screws securing the transmission
case cover to the transmission; then remove the
cover. Account for the dowel pins and gasket.
4. Remove the output driveshaft circlip; then remove
the driveshaft from the transmission case cover.
Back
KM106
KM344A
KM609A
Back to TOC
5. Remove the shift shaft; then remove the plug.
Account for one shift cam stopper ball, spring, and
seal/washer.
6. Remove the shift fork guide shaft; then hold the
shift fork away from the shift cam and remove the
shift cam.
Back to Section TOC
KM611A
3
KM677A
KM619A
KM620A
Next
3-25