Removing Right-Side Components - Arctic Cat 2012 DVX 90 Service Manual

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
Removing Right-Side
Components
A. COOLING FAN
B. ROTOR/FLYWHEEL
C. STATOR COIL
D. OIL PUMP
1. Remove the intake pipe/carburetor. Account for an
O-ring in the intake pipe.
2. Remove the cooling fan shroud; then remove the
cooling shroud from the cylinder and cylinder head.
3. Remove the cooling fan; then remove the nut secur-
ing the rotor/flywheel.
4. Remove the rotor/flywheel using the rotor/flywheel
puller. Account for a key.
32
www.mymowerparts.com
5. Remove the stator coil/trigger coil assembly.
YT091A
6. Remove the five internal and three external cap
screws securing the inner magneto housing to the
crankcase; then remove the housing. Account for two
alignment pins and a gasket.
 NOTE: Some engine oil will spill when the cap
screws are loosened.
YT092
7. Remove the oil pump baffle; then remove the nut
from the oil pump shaft and remove the driven gear
and drive chain.
YT029
Manual
Table of Contents
YT145A
YT155A
YT032A