11 • Troubleshooting; Getting Help; Messages On Lcd Display; Blank Display - Pitney Bowes DM125 Operator's Manual

11 • Troubleshooting

Getting Help

There may be times when you need help to solve a prob lem, or you
may want more in for ma tion about how your mail ing system works.
Pitney Bowes pro vides sev er al in for ma tion resources. See
our web and phone support information.
Before you contact us, please read the troubleshooting information
in this chap ter. In many cases, it can help you resolve the prob lem.
Also, you can often restore normal operation by powering down the
unit and then powering it on (simply use the power switch on the rear
of the unit).
If you need to call, please have the following in for ma tion at hand:
• Model Identification: See
• Serial number: See the back of the system.
• Nature of problem: What happens and when does it happen? Did
the machine display an error mes sage?
• The steps you've already taken to solve the problem and the
results.
Messages on the LCD Display
From time to time your system will display an alert or error message.
An alert tells you that something needs at ten tion; an error message
usually tells you about a system con di tion you can fix. In rare in-
stances you may have to call for service or assistance

Blank Display

Symptom
Power lamp is not lit
on the machine
Power lamp is yellow
on the machine
11-1
page
v.
Cause Solution
No power Check that:
coming into
• Power switch, located above the
machine
• power cord is plugged into both mail-
• power cord is not connected to a
Machine in Press any key to awaken it.
sleep mode
power receptacle on the backside
of the machine, is turned on.
ing machine base and wall outlet
switched wall outlet, power strip,
or surge protector
page v for
(see page
v).
SV62667 Rev. A