Pitney Bowes DM125 Operator's Manual page 107

Basic Options
Setting the Date, Time, and Timeouts (cont'd)
Setting ENERGY STAR
You can set the amount of time the machine waits until entering
sleep mode. When the machine is in sleep mode, the display is blank
and you can't process mail. You awaken the machine by merely
pressing any button on the control panel.
1. Press Options.
2. Press Page Down.
3. Select Time and Timeouts.
4. Select Sleep Mode.
5. Key in the amount of minutes (from 1-240) be fore the system
goes into sleep mode.
6. Select OK. The display returns to Time and Timeouts menu.
7. Press Clear (back arrow key) to return to Options menu.
Standby Mode–In order to reach the lowest use of power while still
plugged into an outlet, the switch on the back of the machine may be
toggled "off". Before resuming power to the machine, the switch will
need to be switched to the "on" position.
When you awaken the machine from sleep mode, it will
NOTE:
i
always return to the "Seal Only" screen.
SEAL ONLY
NO PRINTING
Insert envelope or
◄Exit SEAL ONLY
SV62667 Rev. A
7 • System Options
®
Sleep Mode Activation Time
7-9