Pitney Bowes DM125 Operator's Manual page 114

7 • System Options
Basic Options
Setting the Lock Codes and Passwords (cont'd)
Setting/Disabling the Supervisor Password
The su per vi sor pass word prevents unauthorized access to the ac-
counting functions.
1. Press Options.
2. Press Page Down twice.
3. Select LockCode/Passwords.
4. Select Su per vi sor Password.
NOTE:
i
key in the 4-digit code.
PASSWORDS
◄Meter Lock Code
◄Supervisor Password
5. If there is no existing supervisor password:
At the prompt, key in a supervisor password (4 digits) and select
Continue. Re-enter the password again to confirm and select
Continue. At the Supervisor Password has been enabled mes-
sage, select Continue.
If you have an existing supervisor password:
You can either disable the password or change the password.
Supervisor Options
◄Disable password
◄Change password
A. To disable the password:
Select Disable password. At the Supervisor Password has
been disabled message, select Continue.
B. To change the password:
Select Change password. At the prompt, key in a new pass-
word (4 digits) and select Continue. Re-enter the new pass-
word again to confirm and select Continue. At the Supervisor
Password has been enabled message, select Continue.
6. Press Clear (back arrow key) twice to return to Options menu.
7-16
If there is an existing lock code, you are prompted to
Page
Up
Page
Down
Page
Up
Page
Down
SV62667 Rev. A