Printing An Envelope Ad On Incoming Mail - Pitney Bowes DM125 Operator's Manual

Printing an Ad, Date, and Time on Incoming Mail
6. Place the envelope up against the
registration wall of the sys tem and
slide it to the right until the sys tem
grasps it. The system prints the time
and date and ejects the envelope/tape
sheet.
NOTE:
i
mail piece so the date and time
prints on a blank section of the
mail piece.
7. Select Exit AD DATE & TIME when finished to return you to the
Home screen.

Printing an Envelope Ad on Incoming Mail

You can set up your mailing system to print an envelope ad on in-
coming pieces of mail.
1. Press Print Menu.
2. Select Ad Only.
PRINT MENU
◄Seal Only
◄Date & Time Only
◄Ad Only
3. The AD ONLY screen displays. If the current ad shown is correct,
skip to step 6; otherwise select AD.
AD ONLY
◄AD: Recycle
Insert envelope or
◄Exit AD ONLY
4. Select Select an Ad.
◄Select an Ad
◄Install an Ad
SV62667 Rev. A
Make sure you orient the
ADS
4 • Printing Options
Page
Up
Page
Down
Page
Up
Page
Down
Page
Up
Page
Down
4-9