Activation Of An Alarm Or Fault - SDMO R 340 U User And Maintenance Manual

In conjunction with this LED:
a flashing pictogram appears on the LCD screen
representing the circuit affected by the fault and the
associated indicator, if present
(example)
Faults have priority over alarms. Faults are displayed in the descending order of their appearance (from the most recent to the
oldest).
6.2.4.2.

Activation of an alarm or fault

The appearance of an alarm or a fault causes the corresponding screen to be displayed (examples below)
FAULT
ALARM
Low coolant Level
06/10/06
OK=HELP
Press OK (on the scrolling and selection wheel) to access the help message if it is available (example below)
Check the level
Esc=EXIT
If the alarm is no longer active, it is reset automatically (cause disappears).
Press Esc to reset a fault:
reset acknowledged if the cause of the fault has been removed
-
reset not performed if the cause of the fault is still present.
-
10:30
HELP
fuel
message on graphic display (example)
25/12/05
Emergency Stop
Esc=RESET
49/285
FAULT
FAULT
Oil Pressure
15:30
OK=HELP
FAULT
FAULT
06/10/06 15:30
OK=HELP